Replacing a furnace in the East Bay: what to check before you sign
Hire a contractor with a C-20 (heating and air conditioning) license, make sure the quote includes the building permit, and pay no more than $1,000 or 10% up front. Under Bay Area Air District Rule 9-4, zero-NOx standards for residential furnaces take effect in 2029 and apply when a furnace is replaced, so it is worth asking for a heat pump price too.
Check a contractor before you sign: look up a license number or browse licensed HVAC contractors in Alameda County and Contra Costa County.
What the quote should show
- The contractor's name and C-20 license number, matching the CSLB record.
- Make, model and size of the new equipment, and its efficiency rating.
- The building permit and who pulls it. Heating and air conditioning work needs a permit in most cities.
- Any testing the energy code requires. Replacing heating or cooling equipment falls under California's energy code (Title 24, Part 6), which can require duct testing verified by an independent HERS rater. Your building department can say what applies.
- Removal and disposal of the old unit, and any duct, venting, electrical or gas work.
- Labor and equipment warranties, in writing.
- A payment schedule tied to the work, with a down payment of no more than $1,000 or 10%.
The 2029 rule
The Bay Area Air District's Rule 9-4 sets zero-NOx emission standards for residential furnaces, with a 2029 compliance date. Gas furnaces do not meet it, so in practice a replacement after that date will be electric, usually a heat pump. The rule applies when equipment is replaced. It does not require removing a working furnace.
Repair or replace?
If a technician says the furnace must be replaced, ask what failed, whether that part can be repaired, and for a written price for the repair as well. A second opinion from another licensed C-20 contractor is reasonable for a large job.
If you smell gas or a carbon monoxide alarm goes off, leave the house and call PG&E or 911 first.
Common questions
What license does a furnace installer need in California?
A C-20 warm-air heating, ventilating and air-conditioning license. A B general building contractor can also do it as part of a larger project with other trades.
Do I need a permit to replace a furnace in the East Bay?
Yes in most cities. CSLB lists heating and air-conditioning work among the jobs that generally need a permit. The contractor usually pulls it; the quote should say.
Will gas furnaces be banned in the Bay Area?
The Bay Area Air District's Rule 9-4 sets zero-NOx standards for residential furnaces from 2029. It applies when a furnace is replaced, not to working furnaces.
How much can a contractor ask up front for a furnace replacement?
No more than $1,000 or 10% of the contract price, whichever is less.
Sources
- Bay Area Air District, Building Appliance Rules (Rules 9-4 and 9-6)
- California Energy Commission, Building Energy Efficiency Standards (Title 24, Part 6)
- CSLB, A Consumer Guide to Home Improvement Contracts
- CSLB Instant License Check
Last reviewed . This is general information about California rules, not legal advice. For a dispute, contact CSLB or a California construction attorney.